GEPRC TAKER F405 BLS 100A 8S STACK
159,00 €
1
High rated in the EU
Fast & secure shipping — tracking provided
30-day no delivery refund
15-day no update refund
2-year warranty included
Order guarantee
Features
- Use mainstream STM32F405 chip
- Equipped with the latest 42688-P gyroscope
- 16M black box storage
- Integrated LC filter
- Upgrade type-C USB interface
- Directly plugged into the DJI Air Unit
- With TAKER H100_8S_BLS 100A 4IN1 ESC, Dual MOS, high current, silky flight
- Supports 8S Lipo battery
- Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably
- 12V@3A + 5V@3A dual independent BEC
Specifications
GEP-F405-8S Flight Controller
- MCU：STM32F405
- IMU：ICM42688-P(SPI)
- Air Unit Connection：Direct plugging into DJI Air Unit
- Black Box：16M onboard
- Barometer: support
- Motor outputs：M1-M8
- USB Interface：Type-C
- OSD：BetaFlight OSD w/ AT7456E chip
- BEC：5V@3A,12V@3A dual BEC
- Firmware Target：GEPRCF405_BT_HD
- Size：37x37mm
- Mounting: 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle
- Input Voltage：3-8S LiPo
- UART：6 UARTs
- Power Filter：Integrated LC filter
- Weight：8.3g
TAKER H100_8S_BLS 100A 4IN1 ESC
- Input Voltage: 3-8S Lipo
- Ammeter: Support
- Calibration value：200
- Continue Current：100A
- Burst Current：105A（5 second）
- Support Protocol: Dshot 150/300/600
- Size：56.3*61.1mm，hole30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.
- Weight: 28.8g
- Target: B_X_3
Includes
1 x GEP-F405-8S Flight Controller
1 x TAKER H100_8S_BLS 100A 4IN1 ESC
1 x Electrolytic capacitor(50V 4700uF)
1 x DJI connection cable(SH1.0 6pin 100mm)
2 x FC adapter cable(SH1.0 8pin 30mm)
1 x Receiver silicone cable(SH1.0 4pin 150mm)
1 x Camera connection cable(SH1.0-SH1.25 3pin 135mm)
1 x VTX connection cable(SH1.0 4pin-6pin 100mm)
1 x XT90 battery plug
1 x Red and black power cable(10AWG 240mm)
4 x M3*30 screws
4 x M3*25 screws
8 x Nylon nuts(M3)
12 x Silicone anti-shake pads(M3)
